Our Products

Butynol Solvent

Dunlop Butynol Solvent is a mild solvent used for wiping Butynol laps during the installation of Dunlop Butynol waterproofing membranes and for cleaning dried Dunlop Butynol Adhesive from surfaces and application equipment. Its coagulating action helps make adhesive removal easier while minimising surface damage.

Available in

1L – 12654

Safety Datasheet – New Zealand

Share this product

You might also need

DUNLOP Fibre-crete

Dunlop Postcrete Fast Set Concrete for any posthole concrete project requiring fast-setting high strength with structural requirements up to 30 MPa.

Dunlop Postcrete

Dunlop Postcrete Fast Set Concrete for any posthole concrete project requiring fast-setting high strength with structural requirements up to 30 MPa.

Dunlop Postcrete

  • × 20kg bags of Postcrete

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Fibrecrete

  • × 20kg bags of Fibre-crete

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Slabcrete

  • × 20kg bags of Slabcrete

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Butynol Waterproofing Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Artificial Grass Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet & Cork Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floorfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wallfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall & Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Super Tileset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Universal Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Construction Grout

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for depth thicknesses:
    The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Coloured Silicone

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Tile-it

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Rapidset Repair Mortar

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Primer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ultra-White Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Flexible Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Acrylic Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Natural Look Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Fine Coat Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Polish Prep

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Perfect Polish

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile Pointing

  • How to calculate in linear metres:
    Measure the length of the surface in metres.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Added. . .