Our Products

Dunlop Level-Flex Timber Floor Leveller

A high performance self-smoothing screed for timber floors that creates a smooth even finish prior to applying floor coverings.

  • A partially self-smoothing screed for application over timber and concrete
  • Excellent adhesion, flexibility and water resistant properties
  • For ceramic, carpet and vinyl floor coverings
  • Excellent flow and levelling properties
  • No odour
Use On

Timber and Concrete

Location

Indoor

Colour & Sizes
Colour
Size
Item Code
Grey 15.9kg 24885
Coverage

Approximately 7m2 per 14.9kg unit (12kg powder, 2.9L liquid) at 1mm bed thickness or 2.3m2 at 3mm bed thickness

Walkability

3 hours

Floor Coverings

Ready for ceramic tiles after 12 hours on a 3mm screed. Carpet after 24 hours. Vinyl after 48 hours.

Mixing

2.9L water per 12kg of powder

  • All timber floors must be sanded and primed prior
  • On porous surfaces such as concrete prime the surface using a plush broom

Technical Datasheet

Safety Datasheet – Liquid

Safety Datasheet – Powder

Safety Datasheet – Primer

Share this product

You might also need

DUNLOP Fibre-crete

Dunlop Postcrete Fast Set Concrete for any posthole concrete project requiring fast-setting high strength with structural requirements up to 30 MPa.

DUNLOP Postcrete

Dunlop Postcrete Fast Set Concrete for any posthole concrete project requiring fast-setting high strength with structural requirements up to 30 MPa.

Dunlop Tilers Rubber Modified

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tilers Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Paint

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Feather Finish

  • (type in the square metreage number only)

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex Rapidset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Butynol Waterproofing Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Artificial Grass Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet & Cork Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floorfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wallfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall & Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Super Tileset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Universal Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Construction Grout

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for depth thicknesses:
    The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Coloured Silicone

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Tile-it

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All Plus

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Repairer Rapid Patch

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Rapidset Repair Mortar

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Timber Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Primer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ultra-White Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wide Joint Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Flexible Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Undertile Waterproofing

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Acrylic Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Natural Look Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Fine Coat Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Polish Prep

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Perfect Polish

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile Pointing

  • How to calculate in linear metres:
    Measure the length of the surface in metres.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Added. . .