Dunlop Paveseal

Key Advantages:

• Protects Against Stains – Seals out water, oil, and grime to keep pavers looking clean.
• Enhances Natural Appearance – Brings out the colour without a glossy or plastic look.
• Easy DIY Application – Just roll or spray on for fast, hassle-free sealing.

How to Use Dunlop Paveseal:

• Ensure the surface is clean and dry – Remove all dirt, dust, oil, and efflorescence.
• Allow at least 48 hours drying time after washing or rain before sealing.
• Mask off any nearby surfaces you don’t want sealed (walls, plants, etc.).
• Apply with a roller, brush, or low-pressure sprayer in even coats.
• Allow the first coat to dry (typically 1–2 hours, depending on conditions).
• Apply a second coat if needed for added protection and finish.
• Keep sealed areas dry for 24 hours – avoid foot traffic or rain during this time.

Product Limitations:

• Not suitable for use on wet or damp surfaces – the pavers must be completely dry before application.
• Do not apply if rain is expected within 24 hours – moisture can affect the finish and durability.
• Not recommended for non-porous surfaces such as glazed tiles or polished stone.
• May slightly darken the surface or alter colour tone – test on a small area first.
• Not intended for use on surfaces exposed to heavy vehicle traffic.
• Avoid over-application – excess product can result in a patchy or uneven finish.

Available in 2L & 4L jerry cans