Dunlop Quikrepair
Dunlop QuikRepair is a fast-setting repair mortar designed for quick, durable fixes around your home. Ideal for patching concrete, repairing steps, edges, paths, and slabs, it bonds strongly to most masonry surfaces and sets in just minutes. Perfect for small repairs where time is tight, QuikRepair is easy to mix and apply – just add water and get the job done.
Key Advantages:
- Fast Setting – Sets in minutes, ideal for quick concrete repairs.
- Strong Bond – Adheres well to concrete, masonry, and most surfaces.
- Easy to Use – Just add water and mix – no special tools needed.
How to Use:
- Clean the repair area – Remove any dust, loose material, oil, or contaminants.
- Pre-wet the surface – Dampen (but do not saturate) the area before applying.
- Mix with clean water – Add water gradually to the powder and mix to a smooth, workable paste.
- Apply the mix quickly – Use a trowel or putty knife to press the product firmly into the repair area.
- Shape and finish as needed before the product begins to set (it sets fast).
- Allow to cure – Protect the area from foot traffic or water for at least 1–2 hours.
Product Limitations:
- Not suitable for large or structural repairs – designed for small surface patches only.
- Sets very quickly – mix only what you can use within a few minutes.
- Do not apply to surfaces below 5°C or above 30°C.
- Not recommended for use in continuously wet or submerged areas.
- Surface must be clean and free from dust, oil, or loose materials for proper bonding.
- Overworking or adding too much water can weaken the mix.
Available in 1kg, 5kg, 10kg & 20kg
You might also need
DUNLOP Fibre-crete
Dunlop Postcrete Fast Set Concrete for any posthole concrete project requiring fast-setting high strength with structural requirements up to 30 MPa.
DUNLOP Postcrete
Dunlop Postcrete Fast Set Concrete for any posthole concrete project requiring fast-setting high strength with structural requirements up to 30 MPa.