Dunlop Trade NZ
Modified silanes are the most up-to-date technology when it comes to safe and effective timber adhesives. Single part (no mixing),…
DUNLOP Vinyl Adhesive is ideal for adhering vinyl sheet and vinyl tiles to concrete and timber surfaces.
Putting down some artificial grass, outdoor carpet and/or marine carpet? DUNLOP Artificial grass adhesive is perfect for indoor and outdoor…
Laying some vinyl-backed carpet tiles, Vinyl Composition Tile (VCT) or underlay installations? Use DUNLOP Carpet tile adhesive for superior results.
Suitable for use over a range of surfaces, DUNLOP Carpet and Cork adhesive is perfect for setting carpet or cork…
How to Calculate in m2:Measure the width and the length in metres and multiply the width and the length together.
Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.
Δ
Guide for depth thicknesses:The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.
How to measure linear metres::Measure the length of the surface in metres.
Guide for thickness:The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.
Guide for thickness:The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.
Guide for thickness:The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm
Guide for thickness:The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm
Guide for thickness:The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm
How to calculate in linear metres:Measure the length of the surface in metres.