Dunlop Trade NZ
A water-based protective sealer, penetrating and curing within the pores of the grout. This sealer is fast drying and comes…
A premixed and easy to use coloured grout, which contains Grout Shield. No mixing required, therefore no mess!
Flexible, smooth finish grout available in a wide variety of colours. Suitable for ceramic wall and floor tiles, containing Grout…
Flexible and smooth non-sanded grout suitable for ceramic wall and floor tiles. Used in tile joints between 1mm and 4mm.
A flexible sealant with great adhesion and waterproofing properties. Used in wall and floor joints, tiled surfaces, bench tops, cupboards,…
How to Calculate in m2:Measure the width and the length in metres and multiply the width and the length together.
Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.
Δ
Guide for depth thicknesses:The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.
How to measure linear metres::Measure the length of the surface in metres.
Guide for thickness:The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.
Guide for thickness:The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.
Guide for thickness:The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm
Guide for thickness:The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm
Guide for thickness:The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm
How to calculate in linear metres:Measure the length of the surface in metres.