Our Projects

How To Floor Level (Floor Levelling Made Easy)

Before You Start

Before you tile your floor you have to ensure that the floor is level. Dunlop Multipurpose Floor Leveller is the perfect product to level your floors prior to laying carpet or ceramic tiles.

Application

Step 1

Ensure the surface is clean, dry and primed with Dunlop Multipurpose Primer. Allow primer to dry.

Step 2

Mix the floor leveller with clean water according to instructions on the packaging.

Step 3

Pour the floor leveller on to the prepared surface and spread into place with a steel smoothing trowel.

Step 4

The leveller is ready to walk on in just 2 hours and ready to tile over in 4 hours.

Handy Hints

  • Ensure when mixing the correct water ratios are used.
  • Use the Dunlop Ardit Trowel for creating a smooth surface.

Dunlop Tilers Rubber Modified

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tilers Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Paint

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Feather Finish

  • (type in the square metreage number only)

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex Rapidset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Butynol Waterproofing Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Artificial Grass Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet & Cork Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floorfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wallfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall & Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Super Tileset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Universal Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Construction Grout

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for depth thicknesses:
    The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Coloured Silicone

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Tile-it

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All Plus

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Repairer Rapid Patch

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Rapidset Repair Mortar

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Timber Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Primer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ultra-White Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wide Joint Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Flexible Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Undertile Waterproofing

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Acrylic Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Natural Look Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Fine Coat Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Polish Prep

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Perfect Polish

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile Pointing

  • How to calculate in linear metres:
    Measure the length of the surface in metres.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Added. . .